Residential · Ocala, FL
When a floor is peeling, bubbling, or stained through, epoxy removal is the only way to make the next coating last. Elite Epoxy Ocala (serving since 2017) removes failed coatings and installs new industrial-grade epoxy floor systems built for garages, shops, and commercial spaces in Ocala.
Prep and base work decide whether a recoated floor bonds or fails. We start with a moisture check, crack and joint review, and a clear plan for removal based on what is down, epoxy, urethane, paint, or old acrylic sealer. Our crew uses diamond grinding with HEPA dust control and, when needed, shot blasting to open the concrete profile (CSP 2-4) for proper mechanical bond. After removal, we repair spalls and cracks with epoxy gel or polyurea, then clean and vacuum to a dust-free surface before any primer goes on.
Ocala conditions can work against coatings when moisture vapor moves through slabs, especially in garages, car washes, and ground-level retail. If testing shows elevated moisture, we recommend a moisture-mitigating epoxy primer (MVER-rated) before base coats, and we detail slab edges, control joints, and thresholds to limit water intrusion. Finish selection depends on use: 100 percent solids epoxy for build and chemical resistance, polyaspartic or aliphatic urethane topcoats for UV stability, and optional vinyl flake, quartz, or aluminum oxide traction for slip resistance. We also handle cove base transitions and drain slopes for light industrial and back-of-house areas.
Ocala customers choose us because we do epoxy removal the right way instead of coating over problems. We document the existing system, identify contamination (oil, silicone, tire plasticizers), and remove down to sound concrete so the new coating has a clean, profiled substrate. You get straight answers about what can be salvaged, what must be removed, and what the timeline looks like for cure, return to foot traffic, and vehicle traffic. Since 2017, we have built our process around durable prep, consistent film build, and clean job sites with controlled dust and careful masking.
Before we leave, we walk the floor with you and confirm coverage, texture, and transitions at doorways, base plates, and joints. You receive a written scope, product system details (primer, base, broadcast, topcoat), color and flake blend confirmation, and simple care instructions for cleaning and spill response. We explain normal cure times, when to move equipment back, and how to prevent hot-tire pickup and scratches during early cure. The result is a properly bonded recoated floor that looks uniform, cleans easily, and is built to handle real wear.
Most garage projects take 1-2 days depending on repairs and the system selected. Cure time varies; we will specify when you can walk on it and when vehicles can return.
Sometimes, but it depends on adhesion and condition. We typically grind to sound material, remove failing layers, and re-coat with a compatible epoxy primer and topcoat.
Epoxy is commonly used as the basecoat for build and bond strength. Polyaspartic is often used as a fast-curing, UV-stable topcoat that adds abrasion resistance and gloss retention.
Yes. We route and fill cracks where appropriate and patch spalls and pitting with epoxy repair materials so the floor coats smooth and wears evenly.
Dry dust mop or sweep regularly, then mop with a neutral cleaner and water. Avoid harsh acids and leave metal implements off the coating to prevent scratching.
Epoxy removal is the foundation for any long-lasting recoating when a floor is peeling, soft, stained, or coated over oil and dust. If the old coating is delaminating, the new layer will fail with it, even if the product is high quality. Elite Epoxy Ocala removes failed epoxy and other coatings and installs new epoxy, flake, quartz, and polyaspartic systems designed for garages, warehouses, showrooms, and back-of-house commercial floors.
Many epoxy failures start with shortcuts: acid etching instead of mechanical prep, coating over paint or sealer, or skipping moisture evaluation. Our epoxy removal process targets the real cause of failure, not just the visible damage. We mechanically abrade the surface with diamond tooling, remove loose and contaminated material, and vacuum with HEPA filtration to keep dust controlled. Where heavier build coatings or stubborn layers exist, shot blasting can be the right choice to reach clean, sound concrete quickly.
Recoating is not one-size-fits-all. For a typical garage, we may install a penetrating epoxy primer, a 100 percent solids epoxy base coat, a full broadcast vinyl flake, and a polyaspartic or urethane topcoat for UV and abrasion resistance. For commercial floors, we can adjust the system for chemical exposure, cleaning methods, and slip resistance, including quartz broadcast and aluminum oxide additives. Control joints can be honored, filled, or transitioned based on movement and use, so the floor performs without telegraphing failures.
If you need epoxy removal in Ocala, we will provide a written estimate that spells out removal method, repair plan, coating system, and expected downtime. You will know what prep is included, what is excluded, and exactly what finish you are getting. The goal is simple: a properly bonded recoated epoxy floor that stays tight to the slab and holds up to traffic, tires, and daily cleaning.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Ocala. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
