Residential · Ocala, FL
Metallic epoxy flooring gives concrete a deep, 3D shimmer with a seamless, easy-clean surface. Elite Epoxy Ocala installs and repairs metallic systems with proper concrete prep, moisture control, and durable clear coats for homes and commercial floors in Ocala.
Prep is what makes metallic epoxy flooring last. We start with a site evaluation for slab condition, old coatings, cracks, and moisture, then protect walls, baseboards, and doorways. Concrete is mechanically prepped with a diamond grinder (typically 30-60 grit) and HEPA dust control to achieve a clean, open profile, then we detail edges and corners with hand grinders. Cracks and spalls are repaired with epoxy crack filler or polymer-modified patching, control joints are addressed based on the look you want, and oil spots are cleaned with concrete degreaser so the primer bonds. Next we apply a moisture-tolerant epoxy primer and build coat to create a level, uniform base for the metallic layer.
Florida humidity and vapor pressure can ruin decorative epoxies if they are not planned for, so we prioritize moisture management and cure timing. Where needed we use a vapor-mitigating epoxy primer and verify conditions before coating, including surface temperature and dew point. The metallic layer is poured and manipulated with squeegees and rollers to control movement and pattern, then locked in with a high-solids clear coat for depth and stain resistance. Depending on use, we finish with a clear epoxy, polyaspartic, or polyurethane topcoat in gloss, satin, or matte, and we can add a fine aluminum-oxide grit for slip resistance while keeping the metallic effect.
Ocala customers choose us because our process is built around real prep, not shortcuts. We are licensed and insured, serve Ocala since 2017, and provide a free written estimate that spells out the system, prep steps, and warranty terms. Our crews use commercial grinders with dust containment, quality primers and high-solids resins, and we keep batch control tight so color and metallic effects stay consistent across the floor. You get clear communication on schedule, cure time, and how the floor will look in different lighting, so there are no surprises after the clear coat goes down.
Before we call a metallic epoxy floor complete, we do a walkthrough with you under the lighting you use most and address any touch-ups at transitions, drains, and door thresholds. You receive care instructions for cleaners, mats, rolling loads, and when to return to light foot traffic and full service, plus guidance for future recoat intervals to keep the gloss and depth. For repairs, we evaluate the cause first (impact damage, moisture, hot-tire pickup, or coating failure), then blend new material and re-clear the area when possible to maintain the look. The result is a seamless, chemical-resistant floor designed to hold up to daily use while keeping the custom metallic finish you hired us for.
Most garage projects take 1-2 days depending on repairs and the system selected. Cure time varies; we will specify when you can walk on it and when vehicles can return.
Sometimes, but it depends on adhesion and condition. We typically grind to sound material, remove failing layers, and re-coat with a compatible epoxy primer and topcoat.
Epoxy is commonly used as the basecoat for build and bond strength. Polyaspartic is often used as a fast-curing, UV-stable topcoat that adds abrasion resistance and gloss retention.
Yes. We route and fill cracks where appropriate and patch spalls and pitting with epoxy repair materials so the floor coats smooth and wears evenly.
Dry dust mop or sweep regularly, then mop with a neutral cleaner and water. Avoid harsh acids and leave metal implements off the coating to prevent scratching.
Metallic epoxy flooring is a decorative, multi-layer resin system that creates a marbled, dimensional look while protecting your concrete from staining, dusting, and wear. Elite Epoxy Ocala installs new metallic floors and repairs failed or damaged coatings for garages, showrooms, offices, retail spaces, and residential interiors, using proven prep methods and commercial-grade materials.
A great metallic epoxy floor starts with a sound slab and the right profile. We mechanically grind to remove laitance, paint, sealers, and weak concrete, then repair cracks, spalls, and divots so the metallic layer lays flat. After vacuuming and solvent wiping where needed, we apply an epoxy primer (and vapor-mitigation layer when conditions call for it), followed by a pigmented base coat. That base coat sets the tone of the finished floor and helps the metallic pigments “pop” once the design layer is poured.
The metallic layer is where the artistry meets the chemistry. We pour and move the metallic epoxy with squeegees and rollers to create depth, ribbons, clouds, or a tighter marbled pattern, then protect it with a high-solids clear coat. For many spaces, a polyurethane or polyaspartic topcoat adds abrasion resistance and improved stain protection, especially in areas with rolling traffic or frequent cleaning. We also plan around temperature, humidity, and cure windows to avoid issues like amine blush, bubbles, or dull spots.
If you already have a metallic epoxy floor that is scratched, peeling, discolored, or lifting, we diagnose the failure first, often tied to moisture, contamination, or inadequate prep. Some problems can be solved with a recoat after proper sanding and cleaning, while deeper failures may need selective removal and rebuilding of the system. Either way, you get a clear scope, a written estimate, and a finished floor that looks intentional, not patched.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Ocala. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
